JC 3 - High End Phono Preamplifier designed by John Curl

2.650,00 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 8.20 KG

0 Bewertung(en) | Bewertung schreiben

Art.Nr.: JC 3

Produktbeschreibung

Inputs and outputs use Vampire brand 24k gold-plated RCA jacks

Balanced outputs use Neutrik brand premium XLR jacks

MM 47 kOhm, MC 100 Ohm or MC 47 kOhm; (MC 47 kOhm is ideal for high-end Grado moving iron cartridges)

S/N: 86 dB MM; 75 dB MC

RIAA accuracy within 0.2 dB

Exclusively Vishay-Dale resistors in the audio path

Triple shielding; low-carbon mild steel partitions isolate the power supplies & AC wires

Dual mono design; each audio channel is separately enclosed in its own extruded aluminum enclosure

Separate high speed-soft recovery rectifiers, filter caps and voltage regulators for each channel

Superior R-core type power transformer

Mono switch can improve sound of mono and older LPs

Built-in AC line conditioner to prevent AC noise from polluting the circuits

AC polarity reverse switch can reduce hum in many systems

Non-magnetic aluminum rear panel for purest sound

Turn On Options switch: manual or auto with 12V trigger input

Premium detachable heavy gauge IEC AC cord

26’ (3m) trigger wires included

2u Chassis, rack mountable with HRA2 (sold separately)

Parasound 5 year parts, 5 years labor warranty
(For USA and Canada purchases only)

Frequency Response: 20 Hz - 20 kHz, +/- 0.2 dB

THD Distortion:                         THD: < 0.005 % at 20 kHz
S/N Ratio (MM):                        > 86 dB, input shorted, IHF A-weighted
                                               > 80 dB, input shorted, unweighted
S/N Ratio (MC):                         > 75 dB, input shorted, IHF A-weighted
                                               > 70 dB, input shorted, unweighted
Crosstalk:                                 72 dB at 1 kHz
Phono Input Impedance:   MM setting: 47 kOhm
                                               MC setting: 47 kOhm or 100 Ohm
Output Impedance:                   Unbalanced: < 100 Ohm
                                               Balanced: < 100 Ohm per leg
Input Sensitivity at 1 kHz:          MM: 4 mV in for 1.0 V output
                                               MC: 0.4 mV for 1.0 V output
Total Gain:                               MM: 47 dB
                                               MC: 68 dB
XLR Pin Identification:               1 = Ground (Shield)
                                               2 = Positive
                                               3 = Negative (Return)
AC Power Requirement:            115 or 230 VAC 50 - 60 Hz
                                               12 Watts
Dimensions       Width:                     17 1/4" (437 mm)
                        Depth:                    13 3/4" (350mm)
                        Height, with feet:     4 1/8" (105mm)
                        Height, without feet: 3 1/2" (89mm)
Gewicht:           Net:                        8.2 kg
                        Shipping:                11.4 kg